Minecraft Skin Editor

Paint your own Minecraft skin on the real 64×64 skin sheet and watch it update on a 3D model as you draw. Choose classic or slim arms, paint the inner and outer layer separately, then download a PNG you can upload in Java or import in Bedrock.

Updated 2026-11-09

Point at the sheet to see which face you are on

Loading 3D preview…

Shortcuts: B pencil · E eraser · G fill · I eyedropper · Ctrl+Z undo · Ctrl+Y redo. With the sheet focused, arrow keys move the white cursor and Enter paints. Your draft is saved in this browser only.

How to make a skin with the editor

01

Choose a start

Start from the grey New blank sheet, our Colour template, one of our original skins, or load your own PNG.

02

Pick arms and layer

Set Classic or Slim, then choose Inner layer for the body or Outer layer for hair, hats and jackets.

03

Paint

Use Pencil, Fill and Eyedropper. Turn on Mirror while painting to copy each stroke to the other arm or leg.

04

Check in 3D

Rotate the preview, switch the walk animation on, and hide the outer layer to check the base.

05

Download

Press Download PNG. The editor makes the inner layer solid and clears unused areas, then tells you what it changed.

What the editor can do

| Feature | How to use it |
|---|---|
| Pencil (B) | Click or drag to paint single pixels |
| Eraser (E) | Makes pixels transparent – useful on the outer layer |
| Fill (G) | Fills connected pixels of one colour, inside one face only |
| Eyedropper (I) | Picks a colour from the sheet and switches back to Pencil |
| Mirror while painting | Copies strokes to the matching pixel on the opposite limb (and across the centre of the head and body) |
| Mirror right → left / left → right | Copies a whole arm and leg to the other side in one click |
| Layers | Paint on the inner or outer layer; the other one is dimmed on the sheet |
| Show outer layer | Hides the outer layer on the sheet and on the 3D model |
| Undo / Redo | Up to 60 steps (Ctrl+Z, Ctrl+Y) |
| Recent colours | Your last 12 colours, remembered in this browser |

Pointing at the sheet shows which part, face and layer you are on, for example "Right arm · Front · inner layer".

How the 64×64 sheet works

A skin is a flat image that the game folds around six boxes: head, body, two arms and two legs. Each box has six faces – top, bottom, right, front, left and back – laid out side by side on the sheet. The head is an 8×8×8 box; the body is 8 wide, 12 tall and 4 deep; arms and legs are 4×12×4 (arms are 3 wide on slim skins).

Faces in the editor have thin outlines and the hatched areas are **unused**: the game ignores them, so the editor will not paint there. For a printable map of the layout, use our [skin template](/skin-template); the full explanation is in [Minecraft skin size and layout](/guides/minecraft-skin-size-and-layout).

Inner layer and outer layer

The **inner layer** is the body itself. In Java Edition it is always drawn fully opaque, so paint every pixel – a hole will not show as a hole in game. The **outer layer** sits on top and is drawn slightly bigger: half a pixel bigger on the body and limbs and one pixel bigger on the head. Use it for:

- hair volume, fringes and ponytails,
- hats, hoods, helmets and headphones,
- jackets, scarves, armour plates and sleeves,
- boots or trouser cuffs that should stick out a little.

Leave the outer layer transparent anywhere you want the base to show. Keep outer pixels fully opaque if you play on Bedrock, where pixels at 25/255 opacity or lower are invisible.

Classic or slim arms

Switching between **Classic** and **Slim** converts the arms for you. Going to slim drops one column from each arm face; going to classic repeats the middle column. Check the arms afterwards – a sleeve stripe or watch may need a small touch-up. Remember which model you used, because you must pick the same one when you upload. Our guide [slim vs classic skins](/guides/slim-vs-classic-minecraft-skins) explains the difference.

Tips for skins that look good in game

- **Shade with three or four steps** of each colour: a light tone on top faces, the base on the front and sides, a darker tone at the bottom of each piece of clothing.
- **Use warm highlights and cool shadows** – a little yellow in the light tone and a little blue in the dark one looks richer than plain lighter and darker.
- **Give the eyes whites**: one white pixel next to a coloured pixel reads as an eye at 8×8.
- **Paint the back, sides and top too.** In third person, people mostly see your back.
- **Add volume with the outer layer**: hair on the hat layer that hangs one row lower than on the head looks thick in 3D.

Our step-by-step guide [how to make a Minecraft skin](/guides/how-to-make-a-minecraft-skin) walks through a full design.

Exporting and uploading

**Download PNG** saves a 64×64 file. Before saving, the editor fills any transparent pixels on the inner layer with the average colour of that face and clears the unused areas; the message under the editor lists what it changed. Upload the file in the Minecraft Launcher (Java) or import it in the Dressing Room on Windows or mobile (Bedrock), and choose the same arm model.

Want a second check first? Open the file in the [skin viewer & checker](/skin-viewer).

Privacy and keyboard use

Everything happens in your browser. Your current draft and recent colours are saved in this browser's local storage so you can come back later; nothing is sent to us. Clearing your site data removes the draft.

The editor works with a keyboard: focus the sheet, move the white cursor with the arrow keys (Shift moves four pixels), and press Enter or Space to use the current tool. B, E, G and I switch tools.

Frequently asked questions

Is this Minecraft skin editor free?

Yes. It runs in your browser, needs no account and saves nothing on our servers.

Can I edit an existing skin?

Yes. Use "Load PNG" for a 64×64 or 64×32 file (64×32 is converted), open one of our original skins with "Open in editor", or send a skin from the Skin Lookup.

Why did the export change some pixels?

The inner layer must be fully opaque and unused areas should be empty. The editor fixes both on export and tells you how many pixels it changed.

Does the editor support 128×128 HD skins?

No. It edits 64×64 skins, which work in both editions. HD skins are a Bedrock-only import format.

How do I make both arms the same?

Paint one side and press "Mirror right → left" (or left → right), or turn on "Mirror while painting" before you start.

Where is my draft saved?

In your browser's local storage on this device. It is not uploaded, and it disappears if you clear site data.

More on skins

Skin guides

Related tools

Minecraft Skins
Sources: minecraft.wiki/w/Skin · minecraft.wiki/w/Player