Minecraft Skin Size and Layout Explained

Updated 2026-11-08 · MC Seed Maps

A Minecraft skin is a 64×64 pixel PNG image. The game folds it around six boxes – head, body, two arms and two legs – and every box gets two layers: the inner layer (the body itself) and an outer layer on top for hats, hair and clothes. Everything else on the image is unused and should stay transparent.

If you just want to see the layout, open our colour-coded skin template. To paint on it with a 3D preview, use the skin editor. This guide explains what you are looking at.

Skin sizes at a glance

Size Where it works Notes
64×64 Java and Bedrock The standard. Two layers on every body part
64×32 Java (legacy), Bedrock import The old format: no separate left arm/leg, outer layer on the head only
128×128 Bedrock import (Windows and mobile) HD skin, same layout at double resolution

The player model is 32 pixels tall. It is 16 pixels wide with classic arms and 14 pixels wide with slim arms.

Six boxes, six faces each

Each body part is a box with a width, height and depth in pixels:

Part Width × height × depth
Head 8 × 8 × 8
Body 8 × 12 × 4
Arms 4 × 12 × 4 (slim: 3 × 12 × 4)
Legs 4 × 12 × 4

On the image, every box is unfolded the same way. The top and bottom faces sit side by side in the first row. Under them, from left to right, are the right side, the front, the left side and the back. The front is directly under the top face, so the forehead of the face touches the front edge of the top of the head.

"Right" and "left" always mean the character's own sides. When your character faces you, its right arm is on your left – which is why the right arm appears on the left of a front-view picture.

Where each part sits on the sheet

The numbers are the top-left corner of each part's area, counted in pixels from the top-left of the image:

Part Inner layer Outer layer Outer layer name
Head x 0, y 0 x 32, y 0 Hat
Body x 16, y 16 x 16, y 32 Jacket
Right arm x 40, y 16 x 40, y 32 Right sleeve
Left arm x 32, y 48 x 48, y 48 Left sleeve
Right leg x 0, y 16 x 0, y 32 Right pants
Left leg x 16, y 48 x 0, y 48 Left pants

The upper half of the image (y 0–31) holds the head, both layers of the head, and the inner layer of the body, right arm and right leg – exactly the old 64×32 format. The lower half (y 32–63) was added in Java Edition 1.8 for the outer layer of the body and limbs and for separate left limbs.

Inner layer vs outer layer

The inner layer is the skin of the character. In Java Edition it is always drawn fully opaque. If you leave a pixel transparent there, it will not appear as a hole; paint every pixel.

The outer layer is optional and sits on top. The game draws it slightly bigger than the inner layer – half a pixel bigger on the body, arms and legs and one pixel bigger on the head – so it stands away from the body in 3D. That is what makes hats, hoods, hair fringes, jackets and armour look raised.

The outer layer can be fully transparent, partly transparent or fully opaque. Java has drawn partly transparent outer pixels since version 1.9. In Bedrock Edition, pixels with an opacity of 25/255 or lower are invisible. If you want the same look in both editions, use only fully opaque or fully transparent pixels on the outer layer.

Usable pixels

Most of a 64×64 image is used, but not all of it:

Skin Usable pixels per layer Both layers
Classic 64×64 1,632 3,264
Slim 64×64 1,568 3,136
Classic 128×128 (Bedrock) 6,528 13,056
Slim 128×128 (Bedrock) 6,272 12,544

The unused areas – gaps between the parts' areas – should stay completely transparent. The Minecraft Wiki's advice is to keep them transparent, because otherwise the game may not recognise the skin as intended. Our skin viewer & checker counts painted unused pixels and clears them for you.

Classic and slim layouts

Slim skins lose a quarter of the arm width: every arm face that spans the width (front, back, top and bottom) is 3 pixels instead of 4. The side faces of the arm stay 4 pixels deep. Because the arm faces are narrower, everything after them in the arm area moves left by one or two pixels and a thin strip at the end becomes unused. The game ignores the rightmost pixels of a classic arm when you choose slim.

This is why a skin always belongs to one model. Read slim vs classic skins for how to tell them apart and convert between them.

The legacy 64×32 format

Before Java Edition 1.8, skins were 64×32. They had only one arm and one leg in the file: the game mirrored the right arm and right leg to make the left ones. Only the head had an outer layer (the hat). Java still accepts 64×32 skins for upload.

To modernise an old skin, open it in our skin viewer and press Convert to 64×64. It copies the top half, creates the left limbs as mirrored copies of the right ones – matching how the old format looked in game – and leaves the new outer layer empty for you to use.

Bedrock HD skins (128×128)

Bedrock Edition can import 128×128 skins on Windows and mobile. They use the same layout with each pixel doubled, so you get finer detail. Java does not accept them as uploads, so for a skin that works everywhere, stay with 64×64.

Practical tips for painting the layout

  • Keep the canvas at exactly 64×64 and turn off smoothing in your image editor.
  • Paint a bright test pixel and check it in 3D to learn the orientation of each face.
  • Paint the top of the head, the soles and the tops of the shoulders too – they show when you look down, swim or fly.
  • Save as PNG, never JPG.

Our skin template gives you a ready 64×64 file with every face coloured in, and our guide how to make a Minecraft skin takes you through a full design.

Frequently asked questions

What size is a Minecraft skin?

64×64 pixels, saved as PNG. Java also accepts the old 64×32 format, and Bedrock can import 128×128 HD skins on Windows and mobile.

How many pixels of a skin are actually used?

On a classic 64×64 skin each layer has 1,632 usable pixels, 3,264 in total. A slim skin has 1,568 per layer, 3,136 in total.

What is the outer layer of a skin?

A second layer drawn slightly bigger on top of the body, used for hats, hair, jackets and sleeves. It may be transparent where you do not need it.

Can the base layer of a skin be transparent?

No. Java Edition forces the inner layer to be fully opaque, so paint every pixel of it.

How tall is the player in skin pixels?

32 pixels tall and 16 pixels wide with classic arms, or 14 pixels wide with slim arms.

Sources: minecraft.wiki/w/Skin · minecraft.wiki/w/Player

More on skins